DeepCool FH-10 – 10-Port PWM Fan Hub with SATA Power
DeepCool FH-10 – 10-Port PWM Fan Hub with SATA Power
DeepCool FH-10 PWM Fan Hub – 10-port fan hub with SATA power
The DeepCool FH-10 lets you connect up to ten fans to a single 4-pin motherboard fan header. It is suitable for computer builds with more case fans than the motherboard can connect directly.
The hub has ten 4-pin outputs and draws power directly from the power supply through a SATA connector, reducing the load on the motherboard fan header. The PWM signal from the motherboard is distributed to every port, so all connected PWM fans are controlled together according to the motherboard's fan curve.
Benefits
- Ten 4-pin fan outputs from a single motherboard fan header
- Separate 12 VDC power through a SATA connector from the power supply
- PWM signal distributed to every port for shared speed control
- Compact 80 × 46 × 15 mm design weighing only 40 g
- Blue LED indicator confirms that the hub is powered
- Installs using the included screws or hook-and-loop fastener
- Collects fan cables in one place for tidier cable management
How PWM control works
The hub connects to a 4-pin PWM fan header on the motherboard and distributes its control signal to all ten ports.
- All connected PWM fans follow the same control signal and fan curve
- Only the fan connected to port 1 reports its speed to the motherboard
- 3-pin fans can be connected, but PWM speed control requires 4-pin PWM fans
Independent control of separate fan groups requires additional hubs or a fan controller with separate channels.
Installation tips
- Connect the fan you want to monitor to port 1, as it is the only port that reports speed.
- Mount the hub behind the motherboard tray or cable cover using the included hook-and-loop fastener.
- Check in BIOS or UEFI that the connected motherboard header is set to PWM mode rather than DC mode.
- Consider the power supply capacity when using all ten ports with high-power fans.
Technical specifications
| Product type | PWM fan hub for computer cases |
| Brand | DeepCool |
| Model | FH-10 |
| Part number | DP-F10PWM-HUB |
| Fan outputs | 10 × 4-pin |
| Fan types | 3-pin and 4-pin fans |
| Motherboard input | 1 × 4-pin PWM fan connector |
| Power supply | 1 × SATA power connector from PSU |
| Rated voltage | 12 VDC |
| Speed reporting | Port 1 only |
| LED indicator | Blue |
| Dimensions | 80 × 46 × 15 mm |
| Weight | 40 g |
| Mounting | Screws or hook-and-loop fastener, included |
| EAN | 6933412710301 |
| Warranty | 2 years statutory warranty in Sweden |
Complete with
- 120 mm or 140 mm PWM case fans
- Fan extension cables when the hub is mounted farther away
- Hook-and-loop straps and cable ties for cable management
- Installation and cable management by PC & HiFi Örebro
Why choose the DeepCool FH-10
- Ten fan outputs from one motherboard header are sufficient even for large cases
- SATA power reduces the load on the motherboard header when many fans are connected
- The PWM signal is distributed so the fans automatically follow the motherboard's fan curve
- Small, lightweight and easy to conceal behind the motherboard tray
PC & HiFi Örebro recommends
We recommend the FH-10 when a build has more fans than motherboard headers and all fans should follow the same fan curve. Its main strengths are the ten ports and separate SATA power. All ports share one control signal and only port 1 reports speed. Use a multi-channel fan controller when front and rear fans need separate control or when each fan speed must be monitored. RGB lighting connects separately; the FH-10 only handles fan power and speed control.